Customized Frame/ Column Rubber Vulcanizing Press Rubber Processing
Machine Hydraulic Press Machine
I. Simple Introduction
● Certificate: CE, ISO9001, TUV, SGS
● Type of rubber vulcanizing press machine: column type, frame type
● Control method for rubber processing machine: PLC automatic
control, automatic control without PLC, manual control
● Heating method: electric heating, steam heating, heat-conducting
XLB-1200x1300 rubber vulcanizing press machine is frame type rubber
processing machine. It is including deckle board, pedestal,
hydraulic cylinder, plunger, moving platforms, top bridge, top and
bottom hot plates and so on.
Rubber vulcanizing machine is mainly applied to vulcanize large
rubber products and volume production of rubber products.
● We could design the most suitable rubber processing machine
according to the customers' actual application. Our engineering
team is with more than 24 years designing experience in rubber
III. Technical Parameter
|Model No.||Rubber vulcanizing press machine XLB-120T|
|Nominal clamping mold force||120T|
|Unit area pressure||22Kg/cm2|
|Working oil pressure||16MPa|
|Hot plate size||1200*1300mm|
IV. Loading Picture for Your Reference
V. Our service
1. Our team could design the most reasonable machines for the
customers according to different products and workshop size.
2. We could provide the designed drawings of the machines for the
3. Test running: The above machines are all passed inspection of
3~5 hours full load operation before leaving our factory. And we
will take the video and send it to you for inspection. You can use
it directly thus saving the time of test-run and expense. And we
also warmly welcome to our factory to inspect and test running.
4. If needed, our engineers could install the machines for the
customers and give training for their workers.
5. The instruction books of installation and operation will be sent
to the customers together with the machines.
6. We provide 24-hour technical service for customers. The email
address for technical service is email@example.com
7. Warranty: 12 months after installation, if our machines have any
problems, please feel free to contact me. We will solve it for you
as soon as possible, and give you the best solutions.
1. Delivery time of the rubber processing machine?
--This is specially designed machine according to your specific
From engineer designing to production completion, it needs about
2. What does your factory do regarding quality control for the
rubber vulcanizing press machine?
-- We pay much more importance to quality control from the
beginning to the end of production.
Every machine will be fully assembled and carefully tested before
3. What's the packing for the rubber vulcanizing machine?
-- Usually, The machines are packed by the stretch film first, and
then will be packed with wooden cases. We will also fix the
machines in order to prevent the machines damaged during the
shipment. We also could pack the machines according to the
4. Are you able to give installation and commissioning overseas?
How long time will it take?
--Yes, we can supply overseas service and technical support but
customer needs to pay for the cost of the installation.
Small machine usually takes within 2~3 days. For rubber vulcanizng
press machine, we could provide video call to guide for running and
Big plant usually takes about 30 days.
5. How can I trust you to deliver the right machine as I ordered?
--Before delivery, we will test running the machine for at least 48
hours. And we will take pictures and test running videos and send
them to you to confirm. If you confirm ok, we will arrange
delivery. If not, we will change it to meet with your requirements.