PLC Controlled Rubber Sheet Batch off Cooling Unit Machine with CE
ISO SGS BV
I. Working Conditions of Rubber Batch Off Machine
● Batch off unit environment: the maximum temperature is 40 ℃, and
the minimum temperature is 5 ℃; relative humidity up to 95%.
● Power: 380/50Hz; Cooling water pressure: 0.4MPa; Compressed air
pressure: 0.6 ~ 0.8MPa. (According to the actual customer voltage)
II. Usage of rubber sheet cooling machine
After the raw material pressed by pressing machine, into the rubber
cooling machine for soaking, cooling and drying, and then
III. Detailed Pictures For Reference
IV. Technical Details of Batch Off Cooler
|Rubber Sheet Size||(4-12)X600~700||(4-12)X800~1000|
|Max. Line Speed Of Front Conveyor Belt||31m/min||36m/min|
|Axial Fan||0.37kw 5760m³/m||0.37kw 5760m³/m|
|Swing Rubber Range And Frequency||1.2m 10-16 times/min||1.2m 10-16 times/min|
|Rubber Sheet Temperature After Cooling||≤Greenhouse +5℃||≤Greenhouse +5℃|
|Speed Adjustment Control Method||Inverter control||Inverter control|
|Hanging Rod Speed||160mm or 101.6mm||160mm or 101.6mm|
|Max. Line Speed of Hanging Rod||0.7-4.2m/min||0.6-4.2m/min|
V. Our service
1. If needed,our engineer could install the rubber batch off
machine for the customers and give training for their workers.
2. The instruction books of installation and operation will be sent
it to the customers together with the machines.
3. We provide 24-hour technical service for the customers. The
email address for technical service is email@example.com
4. Warranty: 12 months after installation, if our machines have any
problems, please feel free to contact me. We will solve it for you
as soon as possible, and give you the best services.
5. Our team could design the most reasonable batch off machine for
the customers according to the customers' products and workshop
6. We could provide the detailed drawings of rubber cooler for the
7. Test running of batch off machine: The above machines are all
passed inspection of 3~5 hours of full load operation before
leaving our factory. And we will take the video and send it to you
for inspection. You can use it directly thus saving the time of
test-run and expense. And we also warmly welcome to our factory to
inspect and test running.
1. Delivery time of the Rubber Batch Off Machine?
--This is specially designed machine according to your specific
From engineer designing to production completion, it needs about 25
to 35 days.
2. What does your factory do regarding quality control for Rubber Batch Off Machine?
-- We pay much more importance to quality control from the very
beginning to the end of production.
Every machine will be fully assembled and carefully tested before
3. What's the packing for the Rubber Batch Off Machine?
-- Usually, The machines are packed by the stretch film first, and
small parts will be packed with wooden cases. We will also fix the
machines in order to prevent the machines damaged during the
shipment. We also could pack the machines according to the
4. Are you able to give installation and commissioning overseas?
How long time will it take?
--Yes, we can supply overseas service and technical support but
customer needs to pay for the cost of the installation.
Small machine usually takes within 2~3 days.
Big plant, such as Rubber Batch Off Machine usually takes about 30 days.